Features：Self-diagnosis of network failure status, and display the status reported to the server, the key light is lit when the device is connected to the server;"One-key help" function: pre
Features：
Self-diagnosis of network failure status, and display the status reported to the server, the key light is lit when the device is connected to the server;
"One-key help" function: press the intercom button, you can talk to the intercom microphone (master and sub-control microphone) set by the "Management Center" software, press and hold the button for 3 seconds to activate this function.
Intercom channel transfer: When the main intercom microphone is busy, it can be transferred to the sub-intercom microphone, intercom transfer time: standard 10 seconds, can be self-defined.
Built-in 2 * 15W output class D amplifier, can be connected to two 8Ω passive speakers.
IPPA function: when there is no intercom task, the connected external speaker can be used as a broadcasting speaker to play the broadcasting content set by the "Management Center" software.
Positioning beeps: When installing and configuring the device, the "IP Setup Tool" software enables the positioning command, and the device triggers a beep to inform the location of the device.
Remote Upgrade: When the new firmware of the device is released, use the "IP Upgrade Tool" software to upgrade the firmware of the device.
Specification:
Model | IP-9636TB III |
Network port | RJ45，10M/100M port，support 24V poe |
Power | 24VDC |
Support protocols | TCP/IP,UDP,IGMP，FTP，ICMP,ARP, supports cross-gateway and cross-route configuration |
Audio format | PCM（uncompressed format）,ADPCM,MP3,WAV |
Intercom transfer time | standard 10 seconds, can be self-defined |
Reboot time for disconnected from the network or power supply | Less than 1 second |
Transmission rate | 10/100Mbps |
Audio mode | Network packets, CD sound quality |
Amplifier Frequency Response | 20Hz～20KHz |
T.H.D. | ≤1% |
SNR | ＞90dB |
Built-in speaker output impedance and rated power | 4Ω，3W |
Built-in amplifier | 2*15W, 8ohms, D class |
Mic Input Sensitivity | 1.5mV. |
Operating temperature | -20℃～+60℃ |
Working humidity | 10%～90% |
Power consumption | ≤40W |
Power source | DC24V or 24VPOE |
Dimensions | 117(W) × 38(D) × 194(H) mm |
Weight | 1kg |
