Thinuna IP-9608SP III Network Power Sequencer

Features:Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.Network fault self-diagnosis, network and service status disp

  • Model No.: IP-9608SP III
  • Name: Network Power Sequencer
  • Standard: CE ; RoHS

Features:

  • Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.

  • Network fault self-diagnosis, network and service status display.

  • Connected through the network to form a distributed system, the network management center software provides comprehensive control and management of the devices in the system.

  • With emergency mode, all power outputs can be turned on or off immediately in case of emergency.

  • The power of each channel can be turned on or off manually or through software control.

  • The power can be turned on and off sequentially, either manually or through software control.

  • The timing interval for sequentially turning the power on or off can be set.

  • The power port of each channel can be timing programmed to achieve unattended power management of the whole system.

  • Eight-CH power supply output with a set of editable on and off program controls, and program editing using an innovative behavior learning model.

  • Each channel has an independent key switch and status indication, providing users with maximum flexibility.

  • With keyboard password lock function to prevent misoperation and facilitate user management.

  • LCD screen display with comprehensive power status indication.

  • With RS232 and RS485 serial numerical control interface, open control protocol to meet third party control.

  • With perfect equipment configuration and real-time control and monitoring functions.

  • With DC12V output, I/O level control input, closed contact control, and cascade output port.

  • Real-time monitoring of input voltage and output current, providing 2 levels of over-voltage and over-current protection functions, divided into sound and light alarm and cut-off protection. Each level of protection voltage and current value is set by users according to their needs, which maximally ensures the power safety of users' equipment.

  • The whole machine configuration 40A air switch, each channel using 10A national standard five-hole socket (optional universal plug), 30A relay control, suitable for high-power use occasions.

  • Optional 20A purification filter module.

  • 19-inch, 1U standard chassis. Thickened aluminum alloy panel.

Specification:

Model

IP-9608SP III

Network interface

Standard RJ45, 10M/100M network port, network port comes with upgrade function

Support protocols

TCP, UDP, IGMP, ICMP, ARP

Transmission rate

10/100Mbps

Network delay

Less than 100ms

Power input

AC 110V / AC 220V

Function

Behavior learning mode programming, automatic timing control, single-channel key control, serial port control

safety protection

40A air switch, current and voltage alarm protection

Total capacity

Max. 40A

Output

Output channel 1-8, 10A, national standard five-hole socket (optional universal socket); DC12V (1A)

Panel control

8-channel control, SET, KEY, ON/OFF buttons

Control interface

DC5~24V, voltage start interface, RS485 serial port, RS232 serial port status output

Power status display

LCD screen display

Purification filter

(Optional) Rated current 20A; complies with European CISPR, US FCC standards.

Software function

Parameter setting, timing programming, real-time control, real-time monitoring

Weight

5.2kg

Dimensions

483 × 182 × 44mm (W×D×H)


Tara +86 13724011793
Tel
Products
Inquiry