The CP-2000 programmable central control system host can be used as a central control system in a conference room, and is suitable for solving the problem of various signal switching and functional co
The CP-2000 programmable central control system host can be used as a central control system in a conference room, and is suitable for solving the problem of various signal switching and functional control of various equipment in the modern conference room. Through the 1.5GHZ high-speed processor, built-in 1G capacity DDR2 memory and 8G large-capacity Flash memory, the system processing and access speed are fast and stable, and proper upgrade requirements in the later period are also guaranteed. With 8 channels of two-way programmable RS-232/485 port, 8 channels of infrared output control port, these more practical and advanced configuration, make the whole system more handy in the application of the project.
Features:
8-CH independent programmable infrared transmission interface.
4-CH custom digital I/O control port, trigger mode can be set arbitrarily.
8-CH RS232/485 programmable interface (support international standard), can transmit and receive 232/485 data.
4-CH weak current relay, support 5V/9V/12V/24V/1A control interface;4-CH weak current relay, support 5V/9V/12V/24V/1A control interface.
1-CH TCP/IP control bus, directly support Apple IPAD, IPHONE and Android platform handheld terminals (providing programming software), support centralized management of large-scale networking.
1-CH independent computer control serial port.
Non-PC architecture embedded system, avoid the waiting time of the boot program and control program execution process.
Adopt a new industrial-grade 32-bit CPU processor, processing speed up to 1.5GHz.
The host has a built-in 1G capacity DDR2 memory and 8G large-capacity Flash memory, which makes the system access speed fast and stable, and fully meets the needs of current use or future upgrade.
The built-in 600MHz DSP coprocessing chip can assist the main processor to process large capacity data, making the system run more reliable and stable.
Using the latest programmable logic FPGA chip Stratix:emoji:10, internal self-built core computing mechanism, no embedded operating system, more stable performance.
Frequency conversion infrared learning function, with infrared codes covering all frequencies, has a good support for air conditioner and some extreme equipment that are difficult to learn.
Support the storage and recall of the central control state control mode, up to 16 central control modes can be stored, and the recall mode supports fast control;
Support seamless integration of CMMAW technology and CCSEB power management technology to enhance the stability of system operation, reduce energy consumption, and support environmental protection.
At the same time support wireless touch screen, wired touch screen, computer, serial port, network, wall panel and other control modes.
The front panel has system hardware and software reset function button and infrared direct recording function button;
The front panel with infrared code recording/transmission/receive/online/error LED status lights.
Built-in monitoring module can detect various functional modules in the equipment, and can also monitor the working state and working temperature, with the function of real-time alarm of abnormal state.
Support multi-code control, that is, one key to send a variety of codes (RS-232 code, RS-485 code, IR infrared).
Open programmable control platform, user-friendly operation interface; Fully support third-party equipment and control protocols, customers can set up a variety of control protocols and codes; Fully support the programming methods and engineering procedures of most manufacturers in the industry on the market, reduce the difficulty of on-site installation and debugging and programming.
Support network control and online program update.
Suitable for large and medium-sized conference rooms, conference halls and academic lecture halls and other places.
International general 12V power supply, suitable for any region, has a number of national safety certification.
High quality, high compatibility and stability, high cost performance.
Specification:
Model | CP-2000 |
CPU | Cortex-A9 core 4 core processor |
Processing speed | 1.5GHZ and above |
Storage: | |
Program memory | 8G Flash |
System memory | 1GDDR |
Control port: | |
Input I/O port | 4 terminal blocks, 9PIN output pin header, with protection circuit, support 0-5V digital input signal |
COM port | 8 DB9 male ports |
Infrared IR port | 9 terminal modules, 3.5 audio interface |
Weak current relay port | 4 terminals, 16PIN output pin header, normally open independent relay, rated 1A/30V AC/DC |
Network extension interface | 1 RJ45 interface, support TCP/IP control interface |
Management port: | |
1 infrared receiving window and 1 infrared code recording button | |
1 DB9 female port, 1 RJ45 interface (rear panel) | |
General: | |
Power supply | DC12V |
Dimensions(MM) | 485×80×24 |
The CP-2000 programmable central control system host can be used as a central control system in a conference room, and is suitable for solving the problem of various signal switching and functional control of various equipment in the modern conference room. Through the 1.5GHZ high-speed processor, built-in 1G capacity DDR2 memory and 8G large-capacity Flash memory, the system processing and access speed are fast and stable, and proper upgrade requirements in the later period are also guaranteed. With 8 channels of two-way programmable RS-232/485 port, 8 channels of infrared output control port, these more practical and advanced configuration, make the whole system more handy in the application of the project.
Features:
8-CH independent programmable infrared transmission interface.
4-CH custom digital I/O control port, trigger mode can be set arbitrarily.
8-CH RS232/485 programmable interface (support international standard), can transmit and receive 232/485 data.
4-CH weak current relay, support 5V/9V/12V/24V/1A control interface;4-CH weak current relay, support 5V/9V/12V/24V/1A control interface.
1-CH TCP/IP control bus, directly support Apple IPAD, IPHONE and Android platform handheld terminals (providing programming software), support centralized management of large-scale networking.
1-CH independent computer control serial port.
Non-PC architecture embedded system, avoid the waiting time of the boot program and control program execution process.
Adopt a new industrial-grade 32-bit CPU processor, processing speed up to 1.5GHz.
The host has a built-in 1G capacity DDR2 memory and 8G large-capacity Flash memory, which makes the system access speed fast and stable, and fully meets the needs of current use or future upgrade.
The built-in 600MHz DSP coprocessing chip can assist the main processor to process large capacity data, making the system run more reliable and stable.
Using the latest programmable logic FPGA chip Stratix:emoji:10, internal self-built core computing mechanism, no embedded operating system, more stable performance.
Frequency conversion infrared learning function, with infrared codes covering all frequencies, has a good support for air conditioner and some extreme equipment that are difficult to learn.
Support the storage and recall of the central control state control mode, up to 16 central control modes can be stored, and the recall mode supports fast control;
Support seamless integration of CMMAW technology and CCSEB power management technology to enhance the stability of system operation, reduce energy consumption, and support environmental protection.
At the same time support wireless touch screen, wired touch screen, computer, serial port, network, wall panel and other control modes.
The front panel has system hardware and software reset function button and infrared direct recording function button;
The front panel with infrared code recording/transmission/receive/online/error LED status lights.
Built-in monitoring module can detect various functional modules in the equipment, and can also monitor the working state and working temperature, with the function of real-time alarm of abnormal state.
Support multi-code control, that is, one key to send a variety of codes (RS-232 code, RS-485 code, IR infrared).
Open programmable control platform, user-friendly operation interface; Fully support third-party equipment and control protocols, customers can set up a variety of control protocols and codes; Fully support the programming methods and engineering procedures of most manufacturers in the industry on the market, reduce the difficulty of on-site installation and debugging and programming.
Support network control and online program update.
Suitable for large and medium-sized conference rooms, conference halls and academic lecture halls and other places.
International general 12V power supply, suitable for any region, has a number of national safety certification.
High quality, high compatibility and stability, high cost performance.
Specification:
Model：CP-2000
CPU：Cortex-A9 core 4 core processor
Processing speed：1.5GHZ and above
Storage:
Program memory：8G Flash
System memory：1GDDR
Control port:
Input I/O port：4 terminal blocks, 9PIN output pin header, with protection circuit, support 0-5V digital input signal
COM port：8 DB9 male ports
Infrared IR port：9 terminal modules, 3.5 audio interface
Weak current relay port：4 terminals, 16PIN output pin header, normally open independent relay, rated 1A/30V AC/DC
Network extension interface：1 RJ45 interface, support TCP/IP control interface
Management port:
1 infrared receiving window and 1 infrared code recording button
1 DB9 female port, 1 RJ45 interface (rear panel)
General:
Power supply：DC12V
Dimensions(MM)：485×80×24
