SSL-W8PRO is a system that can be programmed to control peripheral devices. The programmable control panel is a programmable control system composed of three RS232, one RS485 port, three infrared tran
SSL-W8PRO is a system that can be programmed to control peripheral devices. The programmable control panel is a programmable control system composed of three RS232, one RS485 port, three infrared transmitting ports, two relay control ports and one micro USB port. Among them, RS232(1) and IR2 share one port, the two ports can not be used at the same time; RS232(2) and IR3 share one port, and cannot use both ports at the same time. Each button can be programmed and controlled, and the buttons can influence each other or be used independently.
Features:
American standard control panel.
ID cascade function, up to 99 devices can be cascaded, among which 10 devices can interact with each other, and each device can be identified by ID (01～99).
Each button can be programmed to control peripheral devices (cameras, projectors, etc.) through the serial port RS232 and RS485.
With RS232 and USB selection control function, and use software to set.
Customize the function of adjusting the brightness of the buttons.
Customize the function of setting the button label.
Specification:
Model | SSL-W8PRO |
Data transmission port | USB or RS-232 |
Serial control interface | RS-232 port |
Control port | 3 RS-232, 1 RS-485, 3 infrared interfaces, 2 relay interfaces |
Baud rate and protocol | Baud rate: 115200; Data bits: 8 bits; Stop bit: 1, no parity bit |
Frequency | 20Hz ～ 20KHz |
Temperature | 0 ～ +50°C |
Humidity | 10% ～ 90% |
Power supply | 100VAC ～ 240VAC, 50/60 Hz |
Power | 1W |
Dimensions | Aluminum housing: 114x70x28mm |
Weight | 0.15kg |
SSL-W8PRO is a system that can be programmed to control peripheral devices. The programmable control panel is a programmable control system composed of three RS232, one RS485 port, three infrared transmitting ports, two relay control ports and one micro USB port. Among them, RS232(1) and IR2 share one port, the two ports can not be used at the same time; RS232(2) and IR3 share one port, and cannot use both ports at the same time. Each button can be programmed and controlled, and the buttons can influence each other or be used independently.
Features:
American standard control panel.
ID cascade function, up to 99 devices can be cascaded, among which 10 devices can interact with each other, and each device can be identified by ID (01～99).
Each button can be programmed to control peripheral devices (cameras, projectors, etc.) through the serial port RS232 and RS485.
With RS232 and USB selection control function, and use software to set.
Customize the function of adjusting the brightness of the buttons.
Customize the function of setting the button label.
Specification:
Model：SSL-W8PRO
Data transmission port：USB or RS-232
Serial control interface：RS-232 port
Control port：3 RS-232, 1 RS-485, 3 infrared interfaces, 2 relay interfaces
Baud rate and protocol：Baud rate: 115200; Data bits: 8 bits; Stop bit: 1, no parity bit
Frequency：20Hz ～ 20KHz
Temperature：0 ～ +50°C
Humidity：10% ～ 90%
Power supply：100VAC ～ 240VAC, 50/60 Hz
Power：1W
Dimensions：Aluminum housing: 114x70x28mm
Weight：0.15kg
