The DA series of professional power amplifiers are Class D installation amplifiers. It is suitable for two types of 70/100V line installations (optional via DIP switches). Each channel has volume control and LED indicators (signal, clipping and protection).
The DA series of professional power amplifiers are Class D installation amplifiers. It is suitable for two types of 70/100V line installations (optional via DIP switches). Each channel has volume control and LED indicators (signal, clipping and protection). Input and output connections are made through European-style terminal blocks. Its 1U chassis height and 19-inch size are very suitable for many types of installations, and it utilizes a multi-channel design.
Features:
High current switching power, can achieve high power output, low noise and low distortion;
Substantial protection circuits, such as thermal protection, short circuit protection, power on/off mute and delay protection;
Built-in limiter;
European-style terminal block input and output;
Front gain control, easy to use;
Signal, clip protection and power LED indicators are used to monitor performance;
Power amplifier disabled/priority/fault status;
Power amplifier 2-channel or 4-channel installation;
70/100V line operation;
Power output (70/100V): 2X150W / 2X300W / 2X600W;
1U chassis 19'' size;
Switching power supply, class D power amplifier.
Specification:
Model | DA-2150H EU | DA-2300H EU | DA-2600H EU |
Output power (100V line) | 150W*2 | 300W*2 | 600W*2 |
Output power (70V line) | 150W*2 | 300W*2 | 600W*2 |
Input sensitivity | 0.9-1.1V (0+/-1dBV) | ||
Input impedance | 20k (balance)， 10k (unbalance) | ||
Frequency response | 100 Hz - 15 kHz | ||
Voltage gain（100V） | 40 dB | ||
THD+N | <0.1% | ||
S/N | >95 dB | ||
Crosstalk | >70dB | ||
Damping coefficient | >200 | ||
Power output circuit | Switching power supply, class D | ||
Power supply | AC 110-240V, 50/60 Hz | ||
Protection | Short circuit, open circuit, overheating, ultrasonic and radio frequency | ||
Connector | Input and output: European-style terminal block | ||
Control | Front panel: AC power switch, input level control of each channel Rear panel: 70V/100V selector | ||
Indicator light | Signal: Green LED light, Clipping: Red LED light, Power supply: Green LED light, Protection: Red LED light, Priority: Green/Red LED light | ||
Dimensions (WxHxD) | 483x44x360 (mm) | ||
Weight | 4.7kg | 5.1kg | 5.1kg |
Downloads: Manual (English) Manual (Chinese) CAD drawing
